home contact us site map
Home
About Us
Products & Services
Brochures
Contact Us
rEscan North America

By providing products and services that can detect problems in a conveyor system before becoming severe, rEscan can alert and inform on-site personnel and can help formulate an appropriate response to a problem - be it requiring repair, removal or further monitoring.  

This proactive maintenance can result in the conveyor system lasting well into the future and help minimize unscheduled down time and cost.  By utilising our remote and semi-remote systems this allows monitoring to occur at anytime without stopping the belt..


Splice Monitoring System (SMS)


 The Splice Monitoring System allows the remote measurement of splice elongation. The SMS monitors all types of splices in fabric conveyor belting by imbedding small targets into the belting at a set distance on either side of each vulcanised splice.  No such targets are imbedded for mechanical clips.

The rEscan SMS system monitors these distances each time a splice passes its 'sense' transducer. This distance can be accurately measured and, should any splice fall outside set limits, rEscan can alert on-site personnel, who can then inspect the offending splice/s.

In addition, the system can be used to help identify if a clip has suffered severe damage and must be replaced.
 Image of target layout
Shortly the SMS system will be shortly upgraded with a further module:  R.A.D.A.R. "Rip Analysis Detection and Recording'. This weill enable rip detection coupled with splice monitoring forfabric belting.
copyright rEscan International
Design provided by Free Web Templates - your source for free website templates